| Random files - Project 1 |
Rudder Pedal Center Support Bracket130 views
|
|
Canopy latched with lock tumbler visible148 views
|
|
Elevator root ribs located and prepped for bonding84 views
|
|
Rib and Spar Together64 viewsPerfect fit.
|
|
Horizontal Stabilizer Install Prep 1119 views
|
|
Canopy Gas Spring and Shoulder Harness Gussets109 views
|
|
Engine Mount Installed89 viewsThe fuselage is leveled in pitch and roll. The engine mount is leveled across the nose gear attach points and the bolt holes located.
|
|
Canopy Gas Spring Extended Side View118 views
|
|
| Last additions - Project 1 |
Canopy latched with lock tumbler visible148 viewsMar 13, 2007
|
|
Canopy Latched into fuselage receptacles158 viewsMar 13, 2007
|
|
Canopy Lock closed138 viewsMar 13, 2007
|
|
Canopy Lock opened135 viewsMar 13, 2007
|
|
Canopy Lock Other View130 viewsI removed the tumbler assembly and ground the housing down so it is below the lock tumbler by the thickness of the canopy skins. This allowed me to drill a perfectly matching hole without the dishing out of the opening called out for by the manual. The lock installation looks much cleaner this way. The tumbler can be removed for canopy painting and reinstalled after the paint is buffed out.Mar 13, 2007
|
|
Canopy Lock152 viewsWe opted for the bonded in back plate. I used some extra Carbon Graphite I had around.Mar 13, 2007
|
|
Canopy Latch Receptacle Bonded127 viewsMar 13, 2007
|
|
Canopy Latch Over center Spring127 viewsMar 13, 2007
|
|
